Smart * safe * efficient * environmentally friendly * comfortable

Ergonomics: The good use of the ergonomic design concept of the whole machine reduces the fatigue strength of the operator from multiple angles and improves the driving comfort of the operator, which truly embodies the human-oriented design concept.

 1.The use of the 1 300mm small diameter steering wheel greatly reduces the fatigue strength of the left arm. The ultra-low torque full hydraulic steering gear has precise steering, low resistance, and no hydraulic recoil, which increases the comfort of the operator and is more suitable for long-term operation of the operator.

 2 The design of larger leg space not only reduces the constraints on the legs during operation; the lower and wider boarding pedal design is convenient for the operator to get on and off the vehicle.

 3 The steering wheel angle can be adjusted up to 15 degrees, the seat's front and rear movement distance is 150mm, and the backrest can be adjusted at 45 degrees. The operator can adjust it according to the needs, suitable for people of all shapes.

 4 High-elastic rubber tires, shock-absorbing steering bridge, suspension cab, high-elastic shock-absorbing seats and other multiple shock-absorbing effects ensure the comfort of the driver from multiple angles.

 5The wide field of view door frame and the formed overhead guard ensure that the operator has an excellent field of vision,

 6 The multi-function instrument always displays the whole vehicle information and operating conditions, and the operator has a detailed understanding of the whole vehicle information in time,

 7 The vehicle is equipped with a large button emergency switch to avoid safety problems in emergency situations.

 8 The right operating handle can operate the vehicle easily and safely, and at the same time reduce the fatigue strength of the right arm.

 9 The safety seat with high standard configuration provides a more comfortable and safe working environment for the operator, even if it is operated for a long time, it will not feel tired.

Safety and stability: The design of the whole vehicle always takes higher safety and higher stability as the bottom line, and every detail is to improve the stability of the whole vehicle, or to improve the safety factor of the vehicle.

 1 The design of high pivot steering bridge reduces the distance between the steering bridge and the center of gravity of the vehicle, reduces the swing range of the vehicle body when turning, and achieves higher vehicle stability;

 2 The vehicle design has a lower center of gravity and increases the wheelbase and wheelbase of the vehicle, which not only greatly improves the stability of the vehicle, but also improves the remaining load capacity of the vehicle;

 3 The vehicle adopts a turning deceleration control system, which automatically reduces the vehicle speed when turning at high speeds, avoiding vehicle overturning accidents caused by turning at excessively high speeds, and achieving better stability;

 4 The operator presence perception system completely avoids unsafe accidents caused by misoperation when the driver is not in the car;

 5 The hydraulic and electrical parts are equipped with overload protection to eliminate unsafe factors in use;

 6. Accurate calculation of the relationship between dual drive and steering angle, using electronic automatic differential to achieve pure rolling operation of each wheel, avoiding power consumption and tire wear due to differential problems;

High efficiency, environmental protection and energy saving: high efficiency, environmental protection and energy saving are the guiding ideology of vehicle design, and every effort should be divergent thinking along this guiding ideology

 1 The walking motor adopts a new generation of high-efficiency three-phase AC motor, which has high speed, excellent acceleration, reliable driving performance, and climbing ability, which greatly improves production efficiency and productivity.

 2 The lifting motor also uses a new generation of high-efficiency three-phase AC motor, equipped with a high-efficiency low-noise gear pump, and higher lifting and lowering speed settings, which greatly improves work efficiency.

 3 The design uses 720Ah large-capacity batteries to avoid the cumbersome replacement of batteries during shifts.

 4Using high-efficiency dual-module low-noise gear pump and high-precision gear reduction device, the noise of the whole vehicle is below 65 decibels

 5 No emissions, no pollution and more environmental protection,

 6The use of high-efficiency and energy-saving LED lamps in the whole vehicle combines a series of advantages such as long life, high efficiency and energy saving,

 7 The regenerative braking function can be activated when accelerating at a stop, when reversing forward and backward, when driving on a slope, and when braking, so that the battery can recover energy and extend the battery life. At the same time, the wear of the mechanical friction plate is reduced, and the maintenance cost is more effectively reduced.

Intelligent control: intelligent control of the whole vehicle is to realize vehicle ergonomics, safety, stability, high efficiency, environmental protection and energy saving guarantee

 1 A variety of operating function modes are suitable for different operating conditions,

 2 Precise calculation control ensures the stability of the vehicle,

 3 The perfect combination of compact full AC drive motor and high-efficiency inverter

 4 Large-size LED LCD control panel monitors vehicle status in real time

 5Add multiple optional functions to realize multiple speed control, job control, function display, etc.

 6 Timing charging function avoids power peaks and lowers the cost of use.

Easy maintenance: Maintenance-free and easy-to-maintain greatly reduce the cost of vehicle use, and it is the ultimate guarantee for truly achieving customer satisfaction

 1Completely sealed multi-disc wet brake, truly wear-free

 2The whole vehicle is maintenance-free three-phase AC motor, with high protection level, no wearing parts, greatly reducing maintenance costs

 3 Application of CAN bus control technology to realize reliable data transmission and fault diagnosis.