HQJD Automatic lightweight wallboard making machine production line
The wall is one of the main parts for building a building. According to statistics, the building area of each square meter, about 1.82-2.42m cubed is wall panel, of which the inner wall is about 65-75%. With the development of building industrialization, the developed countries began to change the wall materials as early as 85 years, and the emergence of lightweight wallboard came into being. 1. Product introduction: It is divided into two types: inner wall panel and outer wall panel. The thickness of the inner wall panel is 90, 120 and 150, and the width is between 2500 and 4000. The thickness of the outer wall panel is 150, 180, 200, and 600. 2. Application field: widely used in villas, buildings, industrial plants, warehouses, cold storage, original building and other works. 3. Product features: light weight, high strength, good sound insulation, fire prevention, waterproof, thermal insulation, good machining performance, installation is simple, do not contain harmful substances such as formaldehyde and asbestos, for the green environmental protection and energy saving building materials. 4. Raw materials: stone powder (fly ash、furnace slag、water slag、ceramsite slag), inorganic environmental protection adhesive.
Lightweight wallboard advantages:
A、Light: lightweight partition board production materials mainly adopts light aggregate, weight is lighter, plus 36% of the time hollow rate , bulk density in 600 ~ 1000kg/m3, effectively reduce the weight of the building, at the same time can reduce the basis of economic investment, and convenient for construction and transportation. The manual can carry and install, do not affect the synchronous construction, the material transportation quantity is small,the buildin and the building cost is reduced.
B、 Flexible space interval: can be the weight and the cost of the according to the later decoration design requirements.
C、Enlarge the use area: the owner has to increase the occupancy rate.
D、Heavy lifting load: single point hanging force is 1000 newtons. Cupboard, condole ark, high water tank, plate type radiator can be hang on it.
E、sound insulation: can be insulate the decibel 36 and 42, sound insulation and sound absorption of good building materials.
F、Thermal insulation: the thermal conductivity of the lightweight partition board is: 0.12w /m.k is only 1/10 of the concrete (air dry state), which can greatly reduce the use frequency of cold and warm air conditioning. 9cm thick wallboard can be worth 24cm brick wall, 20cm gas block wall. The wall board does not need the insulation material that can meet the national standard requirement, provide comfortable living environment for people.
G、Fire prevention performance: light wall panel for inorganic matter itself, not burning, not produce poisonous gas, is an ideal fireproof material, also provides the
structure of certain fire prevention function, 9 cm thick wall plate, for example, fire prevention ability for 2 hours.
H、the anti-seismic effect is good: elastic modulus is low, the impact can absorb fast, the seismic level can reach level 8.
I、buried line tube is convenient for scientific production technology to make the product highly accurate, the joint is accurate, and easy to process, can cut, dig the wire slot and so on. Change the old brick wall to bury the line difficult situation.
J、 High strength: It is produced by screw extrusion, so the strength is high, and the connecting part of the plate is connected with a pull lock, so the overall load can reach or even exceed the strength of ordinary brick masonry.
K、 convenient construction: the lightweight wall panel as a board, with advanced scientific installation way, so don't need to brace in the construction, no post, no door lintel, without door window frame installation of concrete bricks, solve the tedious process of bricks in construction, saving the cost. Can be according to, can be nailed, can be chisel, the construction is convenient for water, conduit tube embedded and door window installation and node processing.
L、 high labor efficiency: factory prefabrication, site assembly, fast construction speed, and greatly improvelabor efficiency.
M、no need to paint the light: wall board because of its high precision, it does not need to use a lot of cement mortar to paint, so it can achieve the efficiency of economy in raw materials, labor cost and construction time.
N、 Cleaning on site:does not need to be cleaned, and the wet work is avoided. The overall effect is good, and the construction waste is produced in a small way, which can keep the site clean and tidy.
O、Conforming to the national policies and conforming to the trend of the world development, lightweight wallboard is one of the preferred components of construction assembly industrialization.
